<mark id="zbzjn"></mark>

      <delect id="zbzjn"></delect>

    <b id="zbzjn"></b>
    <ins id="zbzjn"></ins>

      <delect id="zbzjn"></delect>
    <meter id="zbzjn"><rp id="zbzjn"></rp></meter>

    <dfn id="zbzjn"></dfn>

      Welcome to the Company

      Home > Changzhou flores > Product

      Aluminum composite panel-> Construction->Polyester Aluminum composite panel

      Description
        “FLORES” Aluminum composite panel is consisted of 3 layers, the surface and back covers of high strength aluminum alloy sheets and the core of nontoxic low density polyethylene (PE) sheet. The painting in the surface and back aluminum sheets are from PPG.VALSPAR of USA and Becker of Sweden. Strictly according to the international quality system ISO9001 and ISO14001 produce superior quality PE aluminum composite panels. Our PE aluminum composite panels not only passed GB/T1778-1999, they are also passed SGS tests and gained CE certificate.
      Specifications:
      Thickness: 3mm-6mm
      Thickness of aluminum sheets: 0.12mm, 0.15mm,0.18mm, 0.2mm, 0.3mm, 0.4mm, 0.45mm,0.5mm
      Width: 1,220, 1,250, 1,270, 1,500, 1,550 and 1,575mm
      Length: standard 2,440mm and customized length ≤ 6,000mm
      Standard size: 1,220 x 2,440mm (Nonstandard sizes available according to your requirements
      Colors: Refer to color chart, or RAL colors
      Core: PE or fire-proofing
      Coating: PE


      Applications:
      ※Applications:Constructional exterior curtain walls;
      ※Decorative renovation for storey-added old buildings;
      ※ Indoors decoration for interior walls, ceilings, bathrooms, kitchens and balconies;
      ※ Advertisement board, display platforms and signboards;
      ※Wallboard and ceilings for tunnels;
      ※ Raw materials in industrial purpose;
      ※Materials used for vehicle and boat.


      Test report for 3mm polyester ACP

      Items

      Standard index of quality product

      Result

      Conclusion

      Appearance

      Clean surface without swell,flaws.scrath and aberration

      pass

      Qualified

      aberration

      Qualified

      Length: ± 3mm

      0mm~+1mm

      Qualified

      Width: ± 2mm

      0mm~+1mm

      Qualified

      Thickness: ±0. 2mm

      0mm~+0.14mm

      Qualified

      Deviation of dimension

      Deviation of diagonal: ≤ 5mm

      0mm

      Qualified

      Out of straight at sides: ≤ 1mm/m

      0.2mm/m

      Qualified

      Warp: ≤ 5mm/m

      1mm/m

      Qualified

      Thickness of coating

      ≥ 16um

      17um (av.18 )

      Qualified

      Deviation of luster

      ≤ 10

      2.6 ( av.20 )

      Qualified

      Hardness of pencil

      ≥ HB

      2H

      Qualified

      Toughness of coating

      ≤ 3T

      1T

      Qualified

      Adhesive

      Not less than Grade1

      Squaring off method of Grade 0 Grade 1marking method of rolling line

      Qualified

      Impact strength

      50Kg.cm Without paint off and crack

      Pass

      Qualified

      Boiling water resistance

      (Boiling for 2h without change)

      Unchanged

      Qualified

      Acid resistance

      Immerse surface with2%HCI(v/v)for 24H without change

      Unchanged

      Qualified

      Oil resistance

      Immerse surface with 20# engine oil for 24h without change

      Unchanged

      Qualified

      Solvent resistance

      Clean 100 times with dimethylbenzene without change

      Bottom unrevealed

      Qualified

      Cleaning resistance

      ≥ 10000 ( ≥ 10000 times without change)

      Unchanged

      Qualified

      Abrasion resistance Density of surface

      Specified value: ± 0.5Kg/m 2

      3.63Kg/m 2

      Qualified

      Bend strength

      ≥ 60Mpa

      79.6Mpa

      Qualified

      Flexuous modulus of elasticity

      ≥ 1.5×10 4 Mpa

      2.19 × 10 4 Mpa

      Qualified

      Through resistance

      ≥ 5.0kN

      6.25kN

      Qualified

      Cutting strenght

      ≥ 20.0Mpa

      25.7Mpa

      Qualified

      180 o peel strength

      ≥ 5.0N/mm

      6.2N/mm

      Qualified

      Resistance to change of temperature

      -40 o C~80 o C 20 cycles without change

      Unchanged

      Qualified

      Heat deformation temperature

      ≥ 95oC

      116 o C

      Qualified

      Coefficient of heat expansion

      ≤ 4.00×10 -5 oC -1

      2.47 × 10 -5 o C -1

      Qualified

      The test result meets the index requirements of quality product of GB/T17748-1999.
      久久精品青草社区,又色又爽又黄又免费的视频,无码纯肉动漫在线看片,乱中年女人伦中文字幕